| REXROTH 4WE6B7X/OFHG24N9K4/V Valves | L:84 mm; S:17.4 mm; J:56 mm; T max.:100 °C; C0:7.88 kN; N:M10; Designation of open end cover:SCOE205-25; B1:44.3 mm; E:15 mm; L1:27 mm; |
| REXROTH 3WMM6A5X/V Valves | Brand:NTN; Internal Special Features:No; Fatigue limit load, Cu:23.6 kN; ra max:4 mm; Mass:60.8 kg; Min operating temperature, Tmin:-20 °C; Harmonized Tariff Code:8482.10.50.68; Nlim (grease):1,400 rpm; Long Description:220MM Bore; 460MM Ou; Weight / Kilogram:71; |
| REXROTH M-3SEW 6 U3X/630MG24N9K4 R900566289 Valves | H:117 mm; A:49 mm; N:29mm; L1:87 mm; Designation of bearing:UC209G2L3; N2:49 mm; A5:30.2 mm; s1:24.6 mm; N1:19 mm; L3:83 mm; |
| REXROTH ZDR6DP2-4X/25Y Valves | L1:29 mm; Designation of bearing:US209-28G2T04; H1:14 mm; C0:20.8 kN; d:44.45 mm; J:95.3 mm; H2:107 mm; Recommended tightening torque for set screw:8 Nm; Designation of open end cover:SCOU209-28; Weight:1.85 kg; |
| REXROTH S6A1.0 Valves | N:8,7mm; s1:24.2 mm; A:7.2 mm; A2:23.4 mm; H:90.5 mm; d:19.05 mm; S:7.5 mm; d1:32.4 mm; J:71.5 mm; Designation of housing:PFT204-; |
| REXROTH 4WE6A6X/OFEG24N9K4 valves | Other Features:Deep Groove | Non-Fr; Radial clearance class:C3; Nlim (grease):7,700 rpm; Rolling Element:Ball Bearing; Inventory:0.0; Cage Material:Steel; Harmonized Tariff Code:8482.10.50.68; Characteristic inner ring frequency, BPFI:7.42 Hz; Category:Single Row Ball Bear; Outer Race Width:0.709 Inch | 18 Mill; |
| REXROTH 4WMM6E5X/V Valves | d:65 mm; A1:44 mm; H1:27.5 mm; B:68.2 mm; Recommended tightening torque for set screw:22 Nm; d1:86 mm; C0:40 kN; C:57.2 kN; T max.:200 °C; N:22mm; |
| REXROTH M-2SEW 6 P3X/630MG205N9K4 R900211313 Valves | Weight:0.96 kg; m:10 mm; SW:5 mm; G:M10x1,25; d:40 mm; C:28 mm; S:19 mm; D:90 mm; T min.:-20 °C; B:52 mm; |
| REXROTH 4WE6W7X/HG24N9K4/B10 Valves | H:47.6 mm; G:M6x1; H2:95 mm; L:110 mm; Designation of open end cover:SCOU207-22; H1:13 mm; Designation of bearing:US207-22G2T20; B:32 mm; A:48 mm; Z:60 mm; |
| REXROTH M-2SEW 6 P3X/420MG205N9K4 R900206430 Valves | N1:24 mm; L:197.5 mm; Recommended tightening torque for set screw:8 Nm; H:52.4 mm; H2:106.4 mm; C0:20.8 kN; J:151.5 mm; G:M6x1; A:54 mm; Designation of bearing:UC209-28G2; |