| REXROTH DBE30-3X/50YG24N9K4 Valves | Bearing Locking Device:Setscrew; Base to Center Height:Not Applicable; d:2.0000 in; Manufacturing Plant Location:Rogersville, TN; Seal Type:Triple Lip; Anti-Rotation Pin:Yes; Bearing Family:Setscrew Ball Bearin; Ball Material:Steel; Housing Coating:Powder Coat; Shaft Attachment (2):Set Screw; |
| REXROTH 3WE6A7X/HG24N9K4/B10 Valves | H:42.9 mm; T max.:100 °C; H1:13 mm; S:15.9 mm; Weight:1.05 kg; L1:30 mm; A:48 mm; J:66 mm; G:M6x1; d:30.16 mm; |
| REXROTH 4WE10B5X/OFEG24N9K4/M Valves | Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; S:12 mm; B1:48.4 mm; SW:4.76 mm; B2:20.7 mm; r:1.1; C1:7.2 mm; D:100 mm; C:24 mm; |
| REXROTH S10P05-1X Valves | Fatigue limit load, Cu:0.75 kN; d:50 mm; Characteristic inner ring frequency, BPFI:7.94 Hz; Brand:NTN; Max operating temperature, Tmax:120 °C; rs min:1 mm; Dynamic load, C:21.8 kN; da min:55 mm; ra max:1 mm; Mass:0.26 kg; |
| REXROTH ZDR6DP1-4X/210Y Valves | B:36.4 mm; G:R1/8"; H2:82 mm; Designation of housing:PAE206-; B1:48.3 mm; J:76.2 mm; H:42.9 mm; Recommended tightening torque for set screw:8 Nm; A1:25 mm; L1:22 mm; |
| REXROTH S8A5.0 Valves | h1:200 mm; oil level:32 mm; Cover bolts:M8x30; Material of Housing:grey cast; m:400 mm; h:100 mm; F:5 mm; n:260 mm; c:30 mm; N:19 mm; |
| REXROTH 4WE6C7X/HG24N9K4/B10 Valves | Anti-Rotation Pin:Yes; End Cap Groove:Yes; Bearing Inner Ring Material:Steel; Expansion Type:Non-Expansion; Ball Material:Steel; Retainer Material:Nylon; UPC:782475894604; Flinger Type:Rubberized; Base to Center Height:Low; Ship Weight:10.06 LB; |
| REXROTH 4WE6D7X/OFHG24N9K4/B10 Valves | G:M6x1; Recommended tightening torque for set screw:8 Nm; C0:15.2 kN; A2:26.4 mm; S:17.5 mm; Weight:1.25 kg; A1:10 mm; L:135 mm; N:11,5mm; s1:21.45 mm; |
| REXROTH DBW20B2-5X/350-6EG24N9K4/V Valves | Mass:0.12 kg; Fatigue limit load, Cu:0.31 kN; Min operating temperature, Tmin:-25 °C; Da max:45 mm; d:22 mm; Nlim (grease):9,700 rpm; da min:27 mm; Radial clearance class:C3; da max:29.5 mm; Brand:NTN; |
| REXROTH ZDR6DP2-4X/25Y Valves | L1:29 mm; Designation of bearing:US209-28G2T04; H1:14 mm; C0:20.8 kN; d:44.45 mm; J:95.3 mm; H2:107 mm; Recommended tightening torque for set screw:8 Nm; Designation of open end cover:SCOU209-28; Weight:1.85 kg; |