| REXROTH M-2SEW 6 P3X/420MG24N9K4 R900572890 Valves | H:117 mm; Weight:2.43 kg; G:M6x1; B:30.2 mm; N1:19 mm; B1:43.7 mm; Designation of bearing:ES209-28G2T04; A2:35 mm; H1:102 mm; L:144 mm; |
| REXROTH 4WE6F7X/HG24N9K4 Valves | Radial clearance class:C3; Y0:2.8; Min operating temperature, Tmin:-20 °C; d:55 mm; Da max:111 mm; Max operating temperature, Tmax:120 °C; Precision class:P0; Dynamic load, C:51.5 kN; da min:64 mm; Nlim (grease):5,000 rpm; |
| REXROTH 4WE6R6X/EW230N9K4/V Valves | A:60 mm; B:45.3 mm; N1:25 mm; G:M6x1; H:63.5 mm; S:11.8 mm; H2:126 mm; C:43.55 kN; d:50.8 mm; A1:40 mm; |
| REXROTH S10P15-1X Valves | Characteristic rolling element frequency, BSF:4.68 Hz; Mass:0.07 kg; B:12 mm; Min operating temperature, Tmin:-20 °C; Nlim:24,000 rpm; da min:24 mm; da max:25 mm; D1:37 mm; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency, BPFI:5.42 Hz; |
| REXROTH 4WE6E7X/HG24N9K4/B10 Valves | L:92 mm; J:130 mm; A2:45.4 mm; Designation of housing:FLE207N-; Dz:80 mm; Designation of bearing:UC207-21G2L4; s1:21.45 mm; A1:12.5 mm; Designation of closed end cover:SCC207; e:20 mm; |
| REXROTH DBW10B1-5X/315-6EG24N9K4/V Valves | N:23mm; L1:118 mm; Recommended tightening torque for set screw:16.8 Nm; d:60.32 mm; Z:74.4 mm; J:202 mm; s1:32.55 mm; C0:32.8 kN; G:M6x1; J1:92 mm; |
| REXROTH 4WE6W7X/HG24N9K4/B10 Valves | H:47.6 mm; G:M6x1; H2:95 mm; L:110 mm; Designation of open end cover:SCOU207-22; H1:13 mm; Designation of bearing:US207-22G2T20; B:32 mm; A:48 mm; Z:60 mm; |
| REXROTH 4WE6H7X/HG24N9K4/B10 Valves | e:28 mm; B:61 mm; L:140 mm; C0:37.8 kN; J:187 mm; A1:19 mm; s1:30.5 mm; A:48 mm; G:M6x1; Designation of housing:FL310-; |
| REXROTH DBE30-3X/200YG24N9K4 Valves | C:12.8 kN; Recommended tightening torque for set screw:5.5 Nm; d1:32.4 mm; T max.:200 °C; Weight:0.83 kg; T min.:-20 °C; N1:19 mm; B:34 mm; A1:22 mm; Designation of housing:P204N-; |
| REXROTH 4WE6M7X/HG24N9K4/B10 Valves | E:15 mm; Designation of bearing:UC208-24G2; A:47 mm; H1:13 mm; T max.:100 °C; d:38.1 mm; G:R1/8"; S:19 mm; Recommended tightening torque for set screw:8 Nm; L1:27 mm; |