| REXROTH 4WE6P6X/EW230N9K4/V Valves | Max operating temperature, Tmax:120 °C; Mass (without HJ ring):8.57 kg; r1s min:3 mm; d1:140.3 mm; ra max:2.5 mm; Weight / Kilogram:8.17; da max:125 mm; Product Group:B04144; Dynamic load, C:380 kN; Manufacturer Name:NTN; |
| REXROTH DBW30B2-5X/50-6EG24N9K4/V Valves | Adapter sleeve reference:H2313-35; T min.:-20 °C; d1:85 mm; G:M6x1; A2:62 mm; T max.:100 °C; A:50 mm; s1:32 mm; A1:22 mm; C:57.2 kN; |
| REXROTH DBE30-3X/50YG24N9K4 Valves | Bearing Locking Device:Setscrew; Base to Center Height:Not Applicable; d:2.0000 in; Manufacturing Plant Location:Rogersville, TN; Seal Type:Triple Lip; Anti-Rotation Pin:Yes; Bearing Family:Setscrew Ball Bearin; Ball Material:Steel; Housing Coating:Powder Coat; Shaft Attachment (2):Set Screw; |
| REXROTH 3WE6A6X/EW230N9K4/B10 Valves | J1:51 mm; S:7.5 mm; Z:39.6 mm; H:125 mm; T max.:100 °C; L1:65 mm; d:22.22 mm; G:M6x1; s1:13.5 mm; Designation of open end cover:SCOU205-14; |
| REXROTH Z2S16-1-5X Valves | G:R1/8"; H:57.2 mm; Z:24.5 mm; S:19 mm; Designation of housing:PE210N-; A1:34 mm; H1:21.5 mm; H2:115 mm; N:18mm; J:158 mm; |
| REXROTH 4WMM6D5X/V Valves | Designation of open end cover:SCOE210-50; H:57.2 mm; S:24.6 mm; C0:23.2 kN; B:49.2 mm; J:158 mm; A:54 mm; N1:23 mm; Designation of housing:PE210N-; T min.:-20 °C; |
| REXROTH Z2FS10-5-3X/SV Valves | A2:49.4 mm; L:185 mm; T min.:-40 °C; C:43.55 kN; B:32.5 mm; H3:125; s1:36.95 mm; S:12 mm; d1:74.5 mm; N:19mm; |
| REXROTH 4WE6B7X/OFHG24N9K4/B10 Valves | Dz:120 mm; C0:32.8 kN; Designation of closed end cover:SCCE212; T max.:100 °C; Recommended tightening torque for set screw:22 Nm; B:61.8 mm; s1:53.2 mm; d:60 mm; Z:82 mm; A5:30.9 mm; |
| REXROTH 4WE6C7X/HG24N9K4/B10 Valves | Anti-Rotation Pin:Yes; End Cap Groove:Yes; Bearing Inner Ring Material:Steel; Expansion Type:Non-Expansion; Ball Material:Steel; Retainer Material:Nylon; UPC:782475894604; Flinger Type:Rubberized; Base to Center Height:Low; Ship Weight:10.06 LB; |
| REXROTH DBW20B1-5X/315-6EG24N9K4/V Valves | C0:20.8 kN; A4:32.5 mm; Recommended tightening torque for set screw:8 Nm; H3:105; A1:13 mm; H:180 mm; A:36.5 mm; T min.:-40 °C; S:19 mm; J:148.5 mm; |