| REXROTH ZDR6DP2-4X/25Y Valves | L1:29 mm; Designation of bearing:US209-28G2T04; H1:14 mm; C0:20.8 kN; d:44.45 mm; J:95.3 mm; H2:107 mm; Recommended tightening torque for set screw:8 Nm; Designation of open end cover:SCOU209-28; Weight:1.85 kg; |
| REXROTH DBW20B1-5X/50-6EG24N9K4/V Valves | J:184 mm; Z:29.2 mm; S:14.9 mm; L:241 mm; T max.:200 °C; H:69.8 mm; N1:25 mm; L1:70 mm; Designation of bearing:US212-39G2T20; T min.:-20 °C; |
| REXROTH S6A5.0 Valves | A:38 mm; d:41.28 mm; N:16mm; C0:20.8 kN; T min.:-20 °C; s1:24.6 mm; Designation of open end cover:SCOU209-26; A2:52.2 mm; Z:56.3 mm; T max.:100 °C; |
| REXROTH 3WE6B6X/EW230N9K4/B10 Valves | L:118 mm; A2:44.5 mm; s1:16 mm; C:25.7 kN; C0:15.2 kN; T min.:-40 °C; A:36 mm; S:8.5 mm; G:R1/8"; A1:12.5 mm; |
| REXROTH 4WE6A6X/OFEW230N9K4 Valves | ras max:0.3 mm; B:26 mm; Brand:NTN; Precision class:P0; d:20 mm; Mass:0.03 kg; F:25 mm; Lubrication hole on inner ring:Non/No; da min:22 mm; rs min:0.3 mm; |
| REXROTH 4WE6F7X/HG24N9K4/V Valves | Characteristic cage frequency, FTF:0.42 Hz; Da max:78.7 mm; d:45 mm; B:28 mm; d2:52.4 mm; Characteristic rolling element frequency, BSF:6.07 Hz; Y2:3.93; ra max:1 mm; b:5.8 mm; Static load, C0:113 kN; |
| REXROTH 4WE6A6X/OFEG24N9K4 valves | Other Features:Deep Groove | Non-Fr; Radial clearance class:C3; Nlim (grease):7,700 rpm; Rolling Element:Ball Bearing; Inventory:0.0; Cage Material:Steel; Harmonized Tariff Code:8482.10.50.68; Characteristic inner ring frequency, BPFI:7.42 Hz; Category:Single Row Ball Bear; Outer Race Width:0.709 Inch | 18 Mill; |
| REXROTH 4WE10B3X/OFCW230N9K4 Valves | A1:9 mm; Recommended tightening torque for set screw:8 Nm; L:135 mm; Designation of housing:FC207N-; J:110 mm; Designation of closed end cover:SCC207; G:M6x1; H3:90; Z:48.8 mm; S:8.5 mm; |
| REXROTH M-2SEW 6 P3X/420MG24N9K4 R900572890 Valves | H:117 mm; Weight:2.43 kg; G:M6x1; B:30.2 mm; N1:19 mm; B1:43.7 mm; Designation of bearing:ES209-28G2T04; A2:35 mm; H1:102 mm; L:144 mm; |
| REXROTH 4WMM6J5X/V Valves | B:78 mm; L:226 mm; G:M10x1; A2:81 mm; Recommended tightening torque for set screw:27.1 Nm; J:178 mm; d:69.85 mm; N:25mm; s1:39 mm; e:36 mm; |