| 180RV2601 NSK ROLL NECK BEARINGS for ROLLING MILL | Accessories:Seal & Snap-Ring; Fillet Radius ra:0.64 mm; Grease Speed Rating n1:22000 rpm; B:10.00 mm; D:32.0000 mm; Basic Static Radial Load Rating Co:3100 N; Oil Speed Rating n2:28000 rpm; Oil Speed Rating Open/Shielded n2:28000 rpm; Sealed Speed Rating n3:15000 rpm; Basic Dynamic Radial Load Rating C:6890 N; d:12.000 mm; Grease Speed Rating Open/Shielded n1:22000 rpm; |
| Z-524289.02.ZL FAG ROLL NECK BEARINGS for ROLLING MILL | Fatigue load limit Pu:0.98 kN; B:51.6 mm; d:44.45 mm; A1:15 mm; Limiting speed:4000 r/min; Db2:118 mm; GN:1/4-28 SAE-LT; DN:6.5 mm; J6:129 mm; J7:35.5 mm; A:43 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, inch G:0.625 in; R1:28.5 mm; L:143 mm; N:18 mm; A5:33 mm; s1:32.6 mm; T:55.5 mm; Da:125.4 mm; |
| 22328CAKW33C3 SKF MINING MACHINERY BEARINGS | Initial grease fill:765.45 g; P90°:113 kN; Cap bolt recommended tightening torque:1220 N·m; Mass pillow block:62.8 kg; PG:1/4 NPT; P150°:68.1 kN; P120°:73.8 kN; End plug (suffix Y):EPR 13; Da:240 mm; h:63.5 mm; P60°:189 kN; L:466.725 mm; P180°:84.5 kN; Cap bolt, SAE grade:8; ba:48.419 mm; A1:133.35 mm; Appropriate attachment bolt size G:0.875 in; R1:79.375 mm; Taconite seal:TER 108; |
| 23130CAW33C3 SKF MINING MACHINERY BEARINGS | Basic Interchange:-; Basic Radial Load Rating-Static SCO:48600 lbf; Accessories:Mast Guide Type- 307; Basic Radial Load Rating-Dynamic DC:13600 lbf; Basic Interchange BCA:-; Basic Interchange NDH:-; Basic Interchange NSK:-; Basic Interchange MCGILL:-; Basic Interchange SPLIT:-; |
| Z-507536.ZL FAG ROLL NECK BEARINGS for ROLLING MILL | Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; Mass bushing:0.01 kg; Permissible sliding velocity v min.:0 m/s; B:12 mm; D:14 mm; Specific static load factor K0:45 N/mm²; d:8 mm; Permissible sliding velocity v max.:0.5 m/s; |
| 22326CAW33C3 SKF MINING MACHINERY BEARINGS | Thread grub screw G2:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; B4:5 mm; T:41.6 mm; H1:46 mm; A:34 mm; Limiting speed with shaft tolerance h6:4300 r/min; Mass bearing unit:0.31 kg; L:70 mm; Basic static load rating C0:7.8 kN; A1:11.4 mm; Hexagonal key size for grub screw N:3.175 mm; N:10.7 mm; Housing material:Composite for food a; s1:19.8 mm; H:120.5 mm; Recommended tightening torque for grub screw:4 N·m; |
| 22252CAW33C3 SKF MINING MACHINERY BEARINGS | Grease Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:106000 N; Basic Dynamic Radial Load Rating C:88000 N; D:120.0000 mm; Oil Speed Rating n2:4800 rpm; Fillet Radius ra:1.50 mm; B:38.10 mm; d:65.000 mm; Sealed Speed Rating n3:3600 rpm; Accessories:Two Shields; |
| 22238CAW33C3 SKF MINING MACHINERY BEARINGS | Fatigue load limit Pu:3.25 kN; Basic dynamic load rating C:14.7 kN; U:17 mm; Reference speed:16000 r/min; Limiting speed:18000 r/min; Fw:26 mm; Basic static load rating C0:27.5 kN; Ew:30 mm; Mass needle roller and cage assembly:0.015 kg; |
| 23176CAW33C3 SKF MINING MACHINERY BEARINGS | r1,2 min.:5 mm; D1 ≈:1500 mm; Basic dynamic load rating C:39100 kN; Calculation factor Y1:2.2; Calculation factor e:0.31; T:1000 mm; B:1000 mm; Comparative axial load rating CFa:1640 kN; Calculation factor Y2:3.3; Thrust factor K:1.83; Basic static load rating C0:143000 kN; Comparative radial load rating CF:10600 kN; r3,4 min.:12 mm; Mass bearing:5800 kg; Fatigue load limit Pu:6950 kN; Design variant/feature:TQO.1/GWI; |
| 4R3232 NTN ROLL NECK BEARINGS for ROLLING MILL | r, r1,2 min.:1.1 mm; B:35 mm; Mass inner ring:0.58 kg; F:100 mm; d:85 mm; |
| 29FC21155 KOYO ROLL NECK BEARINGS for ROLLING MILL | Cap bolt recommended tightening torque:813.5 N·m; Max. speed for Taconite seal:590 r/min; R2:39.688 mm; Eye bolt:2 x 3/8-16 UNC; N1:28.575 mm; P90°:236 kN; ba:65.088 mm; Initial grease fill:623.7 g; End plug (suffix Y):EPR 16; Da:269.999 mm; PG:1/4 NPT; J max.:463.55 mm; L:539.75 mm; Pa:32.7 kN; da:134.938 mm; Housing:SAFS 530; Appropriate attachment bolt size G:1 in; Taconite seal:TER 127; |
| 68FC48350D KOYO ROLL NECK BEARINGS for ROLLING MILL | Coefficient of friction µ max.:0.1; Mass bushing:0.026 kg; Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; Coefficient of friction µ min.:0.05; Permissible sliding velocity v max.:5 m/s; Tolerance shaft:h8; d:15 mm; D:20 mm; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; B:30 mm; |